Jump to content
Corsair Community

TWINX1024-3200XLPT I want a second set but will I keep the timings


ninoxoxo

Recommended Posts

so will adding a second set (2GB total) keep those tight timings 2-2-2-5

 

right now I have my 3.2 overclocked to a conservative 3.4 and things are working good.

 

ASUS P4P800-E

 

AI Over Clock Tuner: Manual

CPU Freq: 213 MHz

Memory Frequency: 100%/DDR400

Dim Voltage to 2.85 Volts

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 2T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 5T

Burst Length of 8

 

Memory Acceleration Mode [Enabled] From what I read this is there version of PAT. Everything else is at default.

 

Please let me know.

Link to comment
Share on other sites

So what type of timmings can I achieve given my above settings?

 

I got my settings off this forum for the one pair so is there any recomended settings for two pairs?

 

Is it posible to get the 2-2-2-5 timings eventhough its not guaranteed.

 

recomendations please?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...