rogo Posted October 8, 2005 Share Posted October 8, 2005 I have one pc 3200 512mb stick of value select that causes my computer (and 2 others I've threw it in) fail to boot. Also fails the memtest86 boot-up test. I got VS512MB400C3 lot: 0425054-0 purchased from newegg about a year ago. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 10, 2005 Corsair Employee Share Posted October 10, 2005 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.