Jump to content
Corsair Community

2-2-2-5 timings - NOT!

Recommended Posts

I have recently bought a set of XMSXpert memory modules (2x512mb).

I've already had to return one pair as one of the modules prevented post.


The memory is supposed to work at 2-2-2-5 timings. However ,when set to these timings I get plenty of CTD's and also illegal operation messages when using 3d mark 05. The memory works fine in 2-3-3-5 timings. Already flashed bios, already checked settings (including upping voltage to recommended volts as in previous posts)


Any help would be greatly appreciated.

Link to comment
Share on other sites

Ok, part numbers are cmxp512-3200xl / TWINXP1024-3200XL (not sure which one you needed!)


Currently running Bios version 1008-001 on an A8n-SLI Premium.


Everything is set on stock, nothing is overclocked. Memory timings are set to Auto. When in auto mode the memory dashboard tells me the timings are currently 2.5-3-3-5. When I change Bios settings to manual and set to correct timings is when i get the problems.


Is there anything else you need?

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...