Jump to content
Corsair Community

suspected bad mem module


Recommended Posts

upon replacing my old ram (Corsair CMX512-3200LL 400MHz) with the new (Corsair TWINX1024-3200C2PT 400 MHz) my system became unstable and started crashing at random times. The blue screen errors i received were IRQL_NOT_LESS_OR_EQUAL, PFN_LIST_CORRUPT, and PAGE_FAULT_IN_NONPAGED_AREA. Bios settings for the ram are 2.7v, and the auto timings. My bios has the latest version, so im not too sure whats up. suggestions gladly accepted...



Abit IC7-Max3

Corsair 1024-3200C2PT

Seagate 160gb

Intel Pentium 4 3.2 GHz

Link to comment
Share on other sites

  • Corsair Employees

Please load setup/optimized defaults and then set the the following settings.

CPU Freq: 200 MHz

Memory Frequency: 100%/DDR400

Dim Voltage to 2.75 Volts

Resulting Frequency: 200MHz/400DDR

Legacy USB: Disabled

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

Then test the modules one at a time with http://www.memtest.org.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...