Jump to content
Corsair Community

Bad CMX512-3200C2PRO Module


JDogX

Recommended Posts

I built two systems with the same mobo, processor, and ram. Figured out one was having ram issues during the process. Swapped the ram to the other system and the problems followed the ram. Memtested both sets of ram in pairs and individually, and only got errors when the one module was in use. What should I do now?
Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...