Jump to content
Corsair Community

RMA Request


UneedAname45

Recommended Posts

I bought 2 x CM512-3200XLPRO and upon booting up my computer didnt work, i tested the ram in my computer wiz's computers and still didnt work. it is only one of the stix's that dont work so id like to RMA my ram. now, if i can RMA my ram should i send both sticks in? my computer wiz freind said they are made in pairs so they can work better together, is that true?

 

System

P4 3.2

MB ASUS P4P800SE 865PE/ICH5 RET

N-vidia g-force 6800gt

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.8 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200XL Cass 2-2-2-5 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...