Jump to content
Corsair Community

1 gig Flash Voyager not accessable


Recommended Posts

I seem to have the same error that has popped up on several other threads.


My flash drive is detected as PROLIFIC USB drive/hub... and not CORSAIR as it was yesterday. The drive can not be accessed or re-formatted.


I have contacted my vendor (tigerdirect.ca, who are usually pretty good about stuff like this) and they directed me to contact CORSAIR directly.


I guess i will have to request an RMA.

Link to comment
Share on other sites

  • Corsair Employees

Please try the following to reinstall your flash drive and see if you can get it working correctly again:


Plug in the flash drive

Right click on My Computer

Choose Properties

Switch to the hardware tab

There should be a button like "Device Manager". Click on this.

Find your flash drive on this list. Right click on it and choose uninstall.

Unplug the flash drive, wait a few seconds then plug it back in.

You should now get a new hardware wizard dialog from which you can reinstall the drivers.

After reinstalling the drive test it again to see if it is working correctly and let us know. If these steps do not work; you can try rebooting the system after you remove the device before you re-install it. Other wise we will be happy to replace it.

Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...