Jump to content
Corsair Community

1gb kit faulty?


BoB101H

Recommended Posts

Hey guys, here's one for you. I have had this kit (2 512 GB ddr 400 - vs1gbkit400) installed in my pc since May. Went to install Half Life2 to try out DOD and Steam wouldn't launch. Gave up and went to play a little WOW. Got an error "bad batch file". Have never had any issues with either of these two games. Ran the windows Memtest through 5 loops, no problems. Went to check WinUpdate, got a system error, then windows explorer crashed on me. At first I thought my HD was going down, so I reformatted and went to install winxp. Windows would boot, but not load past the welcome screen. Swapped both moduals out and all stability issues went away. Never had ram just "go bad". Would like to get a ticket number to RMA.
Link to comment
Share on other sites

  • Corsair Employees

With this MB and CPU and these modules you would need to manually configure the bios settings. Please try these settings and then test the system with http://www.memtest.org.

CPU Freq: 166 MHz

System Performenace: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

Memory Timings: Manual/User Define

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...