Jump to content
Corsair Community

RMA Request CMX512-3500C2


goldenblood

Recommended Posts

CMX512-3500C2

 

Test Bed 1

Intel 3.06

Abit IC7-G

CMX512-3500C2

6800GT Evga

420w Enermax

 

Test Bed 2

Intel 3.06

Asus P4C800

CMX512-3500C2

6800GT Evga

420w Enermax

 

Test Bed 3

Amd 4000+

Asus A8N-SLI

CMX512-3500C2

6800GT Evga

Antec (If I remember right) TRUPower

 

Dropped System down to 166 – 2 7 3 2 2.7v

 

Memory will not pass bios test, memory will not allow system to boot.

 

Removed Memory put in another stick of CMX512-3500C2 works fine in all systems.

 

Can not run memtest due to the fact it will not post, and the A8N-SLI tells me specifically memory failed.

 

Have tried it in all 4 slots on mboard on Abit (easiest test bed to try on)

 

Memory has worked for the last year in the Asus P4C800 without a problem until last week. No electrical surges, no over clocking was originally allowing the RAM to configure to run at auto settings.

 

I did in fact try what the other posts said to do to try and get it to run the memtest as to report back results, but if it wont post I’m not going to be able to do it.

 

Need an RMA thanks.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...