Jump to content
Corsair Community

Bad CMX512-3200C2PT Module


smalltownhick

Recommended Posts

I have an ASUS A7N8X mbi and I am using an Athlon 2500+ Barton CPU with a single CMX512-3200C2PT module.

 

During post the voice reporter tells me that the memory test failed. I am also having some system instability.

 

If I set the memory auto by SPD it sets it to 2.5-3-3-8 which is not what I read is the optimal setting for that module. I changed my BIOS to run it at 200Mhz and 2.5-3-3-6 and if anything it is more unstable.

 

The memory Serial # is 20145420.001256.

 

Will you give me an RMA?

 

-David

Link to comment
Share on other sites

  • Corsair Employees

Please set these timings and then test the modules one at a time with http://www.memtest.org.

CPU Freq: 166 MHz

System Performenace: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

Memory Timings: Manual/User Define

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...