Jump to content
Corsair Community

Constant BSOD & freezing


Tango Sierra

Recommended Posts

I just recently upgraded hardware to a P5ND2-SLI Deluxe MB and chose Corsair Twin2X1024-5400C4. I have yet to get a stable operating system. I often receive blue screen messages related to memory or some issue. I have run Memtest+ on both sticks, and one at a time. With all configurations I receive massive errors 90k+ within several minutes. I have the memory configured as 4-4-4-12 per Corsair recommendations. Is there something else I can try to resolve this? I have yet to keep the OS running more than a couple of hours, even in safe mode.
Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...