Jump to content
Corsair Community

TWINX1024-3200XL Rev.1.2 faulty !!!


svensen79

Recommended Posts

My Bios settings are default.

I can with the faulty bolt not booten. I have tried this broken bolt on different motherboards. No motherboard wanted with the broken bolt booten. And the other bolt works without problems.

:(:

 

MY Sys:

AMD 64 3000 Venice

MSI K8N Neo2

x800pro

Link to comment
Share on other sites

  • Corsair Employees
These modules have a minimum suggeste voltage of 2.75 Volts so please set the voltage to 2.8 Volts and set the timings to "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...