qwerty69 Posted September 17, 2005 Share Posted September 17, 2005 I bought a TWIN2X1024-5400C4 (4-4-4-12) initially and bought another TWIN2X1024A-5400UL (3-3-2-8) to replace it. I had earlier planned to sell away the TWIN2X1024-5400C4 however no one seems to be interested in it. So i just thought that i could now use 2gb of ram. My question is can i fix these 2 models together on my Asus P5WD2 Premium motherboard? If yes, should i set the latency to the slowest which is 4-4-4-12? Also if i do this, can i still get dual channel? I intend to run it using this config P4 D 2.8 --> 3.55 mhz FSB 253 mhz x 14 Ram 675 mhz Vdimm 2.1v I will greatly appreciate any advise by the experts here. :biggrin: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 19, 2005 Corsair Employee Share Posted September 19, 2005 I would not suggest mixing memory on any MB, but you are welcome to try it and indeed you would need to set the slowest timings. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.