Jump to content
Corsair Community

1 bad memory module


shok

Recommended Posts

i had two 512 sticks of corsair xms 3200 memory in my computer. All was well and then the comp started to play up. I Checked both modules in the computer individually. One worked fine (and still is). The other only recognises 128 meg instead of 512. I contacted supplied reseller and because it was older than 12 months. they say i have to take it up with corsair directly. What should my next step be?
Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts, if you have that option and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...