Jump to content
Corsair Community

RMA request: CMX512-3200XLPRO


Recommended Posts

I've had my memory for about a year now, and it worked fine up until this weekend. Blue screen after blue screen! I ran MemTest86 3.2 with both sticks of CMX512-3200XLPRO in the machine, and each stick individually, and numerous errors were displayed in all cases.


Please let me know what to do next. Thanks.


mobo: Gigabyte K8NSNXP-939

cpu: Athlon FX-53

hdd: WD Raptor 74GB/10,000 RPM

memory: CMX512-3200XLPRO, 2 sticks, neither apparently working correctly.

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.8X volts (+.3 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200XL Cass 2-2-2-5 for example or if you have a Giga-Byte MB I would use "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...