Jump to content
Corsair Community

Problem with TWINX1024-3200C2PT !!


Recommended Posts



I recently purchased parts for my new machine from ebuyer.co.uk. my new rig is



AMD Athlon 64 4000+

TWINX1024-3200C2PT (2X512)

Geforce 7800GTX



Once I assembled the system everything worked fine, the ram count showed that I have 1GB of Ram and all. When I started installing windowsXP Pro I started getting blue screen dumps mentioning IRQ something and physical memory dump. Then I tried removing one of the memory modules and I was able to install it without any issue. Once installed I tried to run the system with the second memory Module and the system was not booting up.


So if I use both the modules i get a physical memory dump. If i use one of those modules(512 MB) it works fine, but if I use the other one nothing happens..


I would appreciate if anyone could guide me in this situation. Am i dealing with a dead Module here or is it something else?


Thanks in advance




Link to comment
Share on other sites

  • Corsair Employees
Yes i did, When i did that the system will hang after the initial screen

I think it would be best to go ahead and replace the modules for you. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

Link to comment
Share on other sites



Thanks for the reply RAMGUY.


I tried running memtest with both the module in and got a error at Test 8


images attached





If i try to boot I am getting this dump as soon i see the windows XP login screen :!:

images attached



if needed these are my bios settings

images attached





My RAM Details Twinx1024-3200c2pt V1.5 (LOT# 0525066-1)


I would appreciate if you could tell me if this means the RAM is bad and i have to go for RMA or does it have something to do with any other parts in my machine.


Thank you for your help




Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...