Jump to content
Corsair Community

Start of RMA for cmx512 3200c2pro


mdey87

Recommended Posts

I was using my computer when all of a sudden my screan fliped out. I thought my video card had crapped out on me, so i replaced it with another one ( friend has same card). Sadly the problem continued. I pulled the ram out and replaced it with some corsair value select ram. After I installed the Value ram the system ran fine again.

 

I have been using the CMX512 ram for 1 year now and have never had any problems. My motherboard is a Asus a8v deluxe.

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...