Jump to content
Corsair Community

Bad Value Select Kit


hineman

Recommended Posts

Dear Memory Guy,

 

I purchased a kit of Value Select on August 1st and have been having problems when one of the modules is loaded. Rebooting happens over and over. I am running a P42.4 and a Asus P4P800 MOBO. Seems like maybe one of the modules is bad. Need to know what you would like me to do regarding RMA.

 

David Hiner

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with wwww.memtest86.com! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...