pkong Posted September 6, 2005 Share Posted September 6, 2005 My windows crashed a lot lately even though I reloaded many times. I used MEMTEST 1.6 to test and found the following errors: Tst Pass Failing Address Good Bad Err-Bits Count Chan --- ---- ----------------------- -------- -------- -------- ----- ---- 3 0 000056bf3b4 - 86.9MB 20202020 20202024 00000004 1 4 0 000056bf3b4 - 86.9MB ece29320 ece29324 00000004 3 5 0 000046bfab0 - 70.9MB 00000020 00000024 00000004 1 5 0 000056bf3b4 - 86.9MB 20202020 20202024 00000004 1 I have run the test with only one module on different systems and errors are shown on all systems. I have four of the same type (two twinx) and only this module have the error. I would like to RMA the memory module. Thanks. Module Info: CMX256A-3200LL XMS3205v1.2 0326098 XMS3200 256MB 400MHz 2326-T1 System Info: P4PE P4-2533 PS. If there is other test I should run, please let me know also. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 6, 2005 Corsair Employees Share Posted September 6, 2005 Can you tell me the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
pkong Posted September 6, 2005 Author Share Posted September 6, 2005 The CPU is a P4 2.533GHz. The BIOS version is 1007. Here is the BIOS setting: [Advanced menu] * CPU Speed - 2533MHz * CPU Frequency Multiple - 19x * CPU External Frequency (MHz) - 133 * Memory Frequency - 333MHz * AGP/PCI Frequency Setting - Auto * CPU Vcore Setting - Auto * CPU Vcore - 1.525V * DDR Reference Voltage - 2.70V [Advanced/Chip Configuration menu] * SDRAM Configuration - By SPD * SDRAM CAS Latency - 2T * SDRAM RAS to CAS Delay - 3T * SDRAM RAS Precharge Delay - 2T * SDRAM Active Precharge Delay - 5T * System Performance Mode - Auto * SDRAM Idle Timer - Auto * SDRAM Burst Length - Auto * Memory Turbo Mode - Disabled * DRAM Refresh Rate - By SPD At this moment, the system only has motherboard, one piece of memory, CPU, and video card only. But it still has errors in MEMTEST. :[pouts: Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 6, 2005 Corsair Employees Share Posted September 6, 2005 Let's get them both replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
pkong Posted September 7, 2005 Author Share Posted September 7, 2005 One question: Since you guys are moving on Sep 09 (http://www.houseofhelp.com/forums/showthread.php?t=42878), should I send the memory to the new address or the original one? Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 7, 2005 Corsair Employees Share Posted September 7, 2005 Yes, please use the new address. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.