Darkeyce Posted September 5, 2005 Share Posted September 5, 2005 I've had this stick of mem for about two years...about a year ago it started showing strange behavior in that it would pass a post test 95% of the time. I retired it bacuase i had other memory to use. I was recently forced to bring it back into service. it ran fine until jsut recently. Now it fails a post test better than 50% of the time. I started to fillout the form to get it RMA'd but one of the required fields is a ticket number? Any help appreciated. Christopher :confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 6, 2005 Corsair Employees Share Posted September 6, 2005 Can you tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Darkeyce Posted April 15, 2006 Author Share Posted April 15, 2006 Ok...i'm back. Board was and ASUS A7N8X Ram Spd = 166 voltage @ 2.6v 2.5-3-3-7 memory settings No performance tweaks set. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 17, 2006 Corsair Employees Share Posted April 17, 2006 Please install the modules in slots 2-3 and then load setup defaults and set these settings and test the system with http://www.memtest.org. CPU Freq: 166 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.