ejs Posted December 24, 2003 Share Posted December 24, 2003 Just built my new PC with these components and planning to OC. I'm new to OC'ing and would like to get suggestions on the manual settings needed for the CPU and RAM. I understand that manual OC'ing is the way to go instead of using the ASUS AI Overclock feature. Thanks in advance......... Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 25, 2003 Corsair Employee Share Posted December 25, 2003 Just turn Off AI Over clocking or Disable it and set the Memory Freq to 400Mhz and I would set the Dim Voltage to 2.75 Volts and then you can use [url]www.memtest86.com[/url] to test but you will need to disable USB Legacy support when running this program. Link to comment Share on other sites More sharing options...
ejs Posted December 25, 2003 Author Share Posted December 25, 2003 Thanks for the info RamGuy... I ran the Memtest and it passed. Should I set the timing manually for the Memory or use the SPD default values. I ran Sandra and it reported the timing as 2.5-3-2-6-1T instead of 2-3-2-6-1T. I also set the Performance Modes on both CPU and Memory to Auto. What is the DRAM Burst Length value suppose to be? The options are 4 or 8 clocks. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 26, 2003 Corsair Employee Share Posted December 26, 2003 The SPD should set the modules up to 2-3-2-6 automatically. If they aren't it could only be the BIOS which means you'll have to manually set your CAS to 2. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.