Jump to content
Corsair Community

New and Older 3200LL


Recommended Posts

  • Corsair Employees
Please try and set the timings manually to these settings and you should be fine: SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 6T And I would set the Dim Voltage to 2.7 Volts as well. Also you shoudl sett he memory Freq at 100% or 1 to1 with this CPU/Chipset.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...