duner Posted July 31, 2005 Posted July 31, 2005 im wondering what bios settings are neccessary to achieve 400mhz with my ram (please, ask for information if i didnt provide enough). Currently it displays 201.1 mhz, 2.64 volts in the led display system specs asus a8n sli deluxe (bios revision 1011) amd athlon 64 3700+ corsair twinxp1024-3200c2 in the bios i have the dram frequency setting at 400mhz and frequency settings are 2.5 3 3 6; everything else set to auto. im sorry if this is a useless post and i didnt look hard enough :eek:
Wired Posted July 31, 2005 Posted July 31, 2005 im wondering what bios settings are neccessary to achieve 400mhz with my ram (please, ask for information if i didnt provide enough). Currently it displays 201.1 mhz, 2.64 volts in the led display system specs asus a8n sli deluxe (bios revision 1011) amd athlon 64 3700+ corsair twinxp1024-3200c2 in the bios i have the dram frequency setting at 400mhz and frequency settings are 2.5 3 3 6; everything else set to auto. im sorry if this is a useless post and i didnt look hard enough :eek: Ummm... you already have it set to the correct settings.
duner Posted July 31, 2005 Author Posted July 31, 2005 Ummm... you already have it set to the correct settings. yeah, i just noticed that...i feel like an idiot now. actually one problem i am having is stuttering, the leds dim briefly and i notice the game stop for a fraction of a second it only happens when i use 2.5 3 3 6 for the timing, when i let the motherboard autoselect the timing it runs fine. vol..tage? i changed it to 2.75 and it appeared to fix it, but now dimm2 reading 2.68 and dimm1 reads 2.73 :confused: putting it at 2.8 makes it 2.73 on dimm2 and 2.78 on dimm1 is this normal? and if so, whats the pros and cons to more voltage? im assuming heat is a drawback? (im new to this so be gentle)
duner Posted August 1, 2005 Author Posted August 1, 2005 i switched the ram between channels and now dimm1 has the higher voltage. is that normal for one ram chip to run higher than the other? im freakin out man!
Corsair Employee RAM GUY Posted August 2, 2005 Corsair Employee Posted August 2, 2005 Should not be an issue as long as you dont go over 2.9 Volts.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.