GA-K8NS Ultra 939 timings help please

[four5acp]

I have a GA-K8NS Ultra 939 with a 3700 A64. I am currently using 2 x cmx3200c2. I just updated my bios to F8 and it changed all the advanced settings (cntrl F1). Here are all the settings and what I am using. Can someone tell me if I have them right? Thanks

 

Timing mode = manual

memclock index value = 200mhz

cas # latency (tcl)= 2.5

min ras# cycle time (tras) = 7t

ras# to cas# delay (trcd) = 3t

row precharge time (trp) = 3t

row to row delay (trrd) = 2t

row cycle time (trc) = 11t

row refresh cycle time (trfc) = 13t

read to write time (trwt) = 4t

read preamble value = 5.5ns

async latency value = 7.0ns

1t/2t dram timing = auto

bottom of 32bit 31:24 IO = EO

mem remap (4G ram support) = disabled

 

DDR voltage control = +.2

 

After getting the bios update I ran memtest 3.2 for 20 hours and got 1 error:

 

Test: 7

Pass: 42

Failing address: 0000e203cbc 226.1mb

Good: 7cbccdd6

Bad: 7cbccdf6

Err Bits: 00000020

Count Chan: 1

 

Thanks to any who can help...

[RAM GUY]

Please try these changes

Timing mode = manual

memclock index value = 200mhz

cas # latency (tcl)= 2.5

min ras# cycle time (tras) = 7t

ras# to cas# delay (trcd) = 3t

row precharge time (trp) = 3t

row to row delay (trrd) = 3t (AUTO SUGGESTED)

row cycle time (trc) = 13t (AUTO SUGGESTED)

row refresh cycle time (trfc) = 15t (AUTO SUGGESTED)

read to write time (trwt) = 4t (AUTO SUGGESTED)

read preamble value = 5.5ns (AUTO SUGGESTED)

async latency value = 7.0ns (AUTO SUGGESTED)

1t/2t dram timing = auto

bottom of 32bit 31:24 IO = EO

mem remap (4G ram support) = disabled

 

DDR voltage control = +.2

[four5acp]

Thanks, am changing now and will re-run memtest.

[four5acp]

The settings you provided worked out great! 18 hours and no errors on memtest. Thanks alot RamGuy!!!

[RAM GUY]

Great and thanks for letting me know.