Oasisi Posted July 23, 2005 Posted July 23, 2005 Hi, I Have 2x512 Corsair 1GB DDR XMS4400C25PT and the problem is that my motherboard won't boot if both the memory sticks are in slots 1&2 Or 3&4 and set to T1. It will only boot if the memory sticks are set at T2 On both sets, But if put only one stick in i can get T1 settings. i have tried various Bios but it has not helped.
Corsair Employee RAM GUY Posted July 26, 2005 Corsair Employee Posted July 26, 2005 Command Rate is more dependant on the CPU and MB and PSU more so than the memory and the fact the modules will run one up at 1t would tend to suggest it may be the CPU and or MB holding you back. Can a friend maybe help you test the modules in another system?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.