Jump to content
Corsair Community

PC2100 Ram module failed


KJauJou

Recommended Posts

I have a DDR 2100 256mb module that has failed. It was installed in a system in August of 2002 and has been working fine till recently. I have tried the module in three motherboards in working systems. In two, which have BIOSTAR KT333 motherboards, it fails to be counted when put in place with an existing module (XXXXXXXXX). In both systems, the BIOS is set to use SPD from the memory module. If installed alone, the systems do not boot. In a third system containing a ECS KT333 motherboard, I receive a BIOS memory failure long beep. Please advise as to the RMA process for this module. Thank you.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...