Jump to content
Corsair Community

Intel D875PBZ & 2x CMX-3200XLPro modules


chopsnsauce

Recommended Posts

Hello,

 

Running standard memory timings (2-2-2-5) gives me a very unstable system.

I've increased my timings to 2-3-3-6 and its rock solid. But obviously it would be great if I could run them at their advertised timings.

 

What am I missing here? What is the recommend mem voltage for these modules? Im running them at 2.625V at the moment. Good/bad?

:bigeyes:

Link to comment
Share on other sites

Minimum suggested voltage for these modules would be 2.75 Volts. But you would need to have the latest hardware revision and the latest MB revision.

 

When you say MB Revision I presume you mean MB BIOS?

 

But what do you mean by hardware revision????

Link to comment
Share on other sites

  • Corsair Employees
The MB you have when it was first released did not give you the option to set the Dim Voltage, only the latest hardware revision of the MB with bios version P27 or newer will have this option.
Link to comment
Share on other sites

The MB you have when it was first released did not give you the option to set the Dim Voltage, only that latest hadrware revision of the MB with bios version P27 or newer will have this option.

 

 

Well I'm on the latest BIOS revision and I know that I can set the RAM voltage. So I'll give your suggestion a go.

 

Thanks for your help!

 

:):

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...