Jump to content
Corsair Community

TwinX1024-3200LL combined with TWINX1024-3200LLPRO


Technics1210

Recommended Posts

hi, I currently have Corsair XMS DDR400 TwinX1024-3200LL 2-3-2-6 1T Non-ECC/Unbuffered and want to add another Gig of Memory cause im still runnig low on memory. Is it possible to add Corsair XMS DDR400 TWINX1024-3200LL"PRO" 2-3-2-6 Non-ECC/Unbuffered to my existing memory or will i need to have all 2gigs with the same type of TWINX1024-3200LL"PRO"? thanks in advance :D: --------------------------------- Pentium4 3.0Ghz 800fsb MSI 875P Neo-FIS2R
Link to comment
Share on other sites

  • Corsair Employees
You would be able to mix the memory in the system. When running 4 modules in the system you would have to relax the timings in order for the system to run correctly. If there is anything else please let me know. Thanks!
Link to comment
Share on other sites

  • Corsair Employees
With most MB that we have tested using 4 modules the timings would have to be 2-3-3-7 or 2.5-3-3-8 in order to have stability on the system. The extra load on the chipset from having more memory in the system requires slowing down the timings. If there is anything else, please let me know. Thank!
Link to comment
Share on other sites

  • 1 month later...
I realized that the modules I have are DDR400 TwinX1024-3200LL 2-2-2-6 1T(the older version) not 2-3-2-6. If i will add another DDR400 TWINX1024-3200LL"PRO" 2-3-2-6 to my current system, and change the timings in the bios ....will they still work out together? Which of the 2 timings you recommended work better? And do i need to adjust the voltage for the modules too? thanks in advance :p: ------ Intel P4 3.0 Ghz / 800FSB MSI Neo-875 Twinx DDR400 pc3200LL 2-2-2-6 1T MSI GeforceFX 5900 256mb
Link to comment
Share on other sites

  • Corsair Employees
The voltage should be at 2.7X. You can start with 2.5-3-3-8 and try lowering the timings on your specific platform. Mixing the older memory with newer memory will still work as long as you set the timings and speed manually.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...