Letzte Legende Posted September 5 Share Posted September 5 Hello, I hope someone here can help me. After I got my replacement AiO because on the first one the Firmware was bricked. I managed to connect everything and its running great so far. Now got a new Fan ( AF Elite ) so that everything looks the same. I plugged the Fan into the Comander Core and started the PC. The 3 Fans on the AiO I cant Set to white. And change the Speed. But the 4 one dont light up and does not Show up in iCUE also my Commander core seems to be gone from iCUE I cant see it anymore. Link to comment Share on other sites More sharing options...
c-attack Posted September 5 Share Posted September 5 Shut down the PC and flip your PSU off. Hold down the case power button for 10 seconds to drain any remaining motherboard power. Go to the USB cable for the Commander Core and disconnect/reconnect it from the MB. Be careful with the connection. It's very easy to misalign the 9 pin connector. Turn the PSU back on and start normally. The power cycle will force the Commander Core to recheck all fan connections. This is automated on that controller. The USB cable is responsible for device to software communication. If a device is missing from CUE, that is the first thing to check. Link to comment Share on other sites More sharing options...
Letzte Legende Posted September 5 Author Share Posted September 5 1 hour ago, c-attack said: Shut down the PC and flip your PSU off. Hold down the case power button for 10 seconds to drain any remaining motherboard power. Go to the USB cable for the Commander Core and disconnect/reconnect it from the MB. Be careful with the connection. It's very easy to misalign the 9 pin connector. Turn the PSU back on and start normally. The power cycle will force the Commander Core to recheck all fan connections. This is automated on that controller. The USB cable is responsible for device to software communication. If a device is missing from CUE, that is the first thing to check. Hey thanks for the reply. It didn't worked. Commander Core is still not visible in iCUE but for some reason I found the Fan he Was listed with the AiO Fans. So I started Fan setup Assistant and now I can set the Fan to the wanted color and speed. Prob this is happening because the Commander Core is for the AiO and thats why it is not appearing in iCUE? Link to comment Share on other sites More sharing options...
c-attack Posted September 5 Share Posted September 5 If you can see the fans in CUE, the Commander Core is not missing. All the fan controls are merged with the AIO lighting/pump controls. All of those run from the Commander Core. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now