Jump to content
Corsair Community

Asus Sli, And Corsair Problem !


islhopr

Recommended Posts

I Just installed 2 gigs of Corsair 3200cpt memory (4x512)

 

The computer sets the Memory clock speed at 200?????!!!!!!

 

I changed to manual, and changed the memory to 400 DDr, and no boot. Changed it to 333,~! AND NO BOOT, finally stepped it down to 266, and machine booted??? Any ideas?? Bad memory stick???

 

System Specs

 

Asus SLI Deluxe MB, with updated BIOS

AMD 3500 Venice CPU / TT Ultra performance Cpu Sink

TT 500 W Power Supply

2 gig Corsair 3200 Cpt 4x512 Meemory

ATI 800XL Video card

1 Terrabyte SATA Raid Hard drive setup (4x Hitachi 250 SATA Drives)

 

Both Sandra, and Asus Utlis recongize the memory running at only 266

 

Thanks

 

Rick

Link to comment
Share on other sites

Revision 1.2 2x512, and 4.6 2x512

 

BUT I have tried the sets seperatly and still can not run either set at the advertised rating, and even with the new set in by itself it just using the two sticks it will only reconigise it at 333! , and have to loosen up the timings to achieve 400 with the one set.

 

I can achieve a little better timimgs than using all 4 at 400, but this is sitll unaccptable, since I am using the Venice 3500 chip, with Asus SLI, June 28th bios.

 

Thanks

 

Rick

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...