Casimir Posted July 5, 2005 Share Posted July 5, 2005 Following several planting under several plays, I have tested my corsair memory in dual channel (2*256Mo pc3200) with memtest v1.50 and i have mass bugs memory nearby the 510Mo. Could you help me plz ? thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 5, 2005 Corsair Employees Share Posted July 5, 2005 Can you tell me our modules part# (How To Read the Memory Label) and the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Casimir Posted July 6, 2005 Author Share Posted July 6, 2005 PART NUMBER : CMX256A-3200LL VERSION NUMBER : v1.1 LOT NUMBER : 0321006 My bios settings is to default, I haven't change settings of memory. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 6, 2005 Corsair Employees Share Posted July 6, 2005 Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and with that MB you will need to disable legacy USB as well. And then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. . Link to comment Share on other sites More sharing options...
Casimir Posted July 9, 2005 Author Share Posted July 9, 2005 ok, with your parameters, all is ok now. thanks very much Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 11, 2005 Corsair Employees Share Posted July 11, 2005 No problem, please let me know if you have any more questions Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.