Jump to content
Corsair Community

Twinx1024-3200c2 rev. 1.5


Recommended Posts

I saw a sale at newegg.com so I went ahead and bought this one since there were lots of good reviews for it from the users you bought it. I have a ecs kv2 board with the latest bios that just came out a couple of days ago. I been getting blue screens while loading windows so I went and got memtest to test out my ram. I tried these settings:

 

3-3-3-8 and that one will not even let my computer to boot up and I get audible tone coming from my computer. So I went ahead and tried these settings: 2.5-3-3-8 which was going find intill I got an 1 error on test 4 and a lockup close to halfway to test 5.

 

So I went ahead and tested these settings: 2.5-3-3-6 and only get 10 errors.

 

Am I using wrong settings? Should I use something else? I noticed there in the bios a tRRP which I am not sure what that is so I leave it alone. What should that settings be?

Link to comment
Share on other sites

CAS Latency (tCL): 2.5

RAS to CAS Delay (tRCD): 3

Row Precharge (tRP): 3

Active to Precharge Delay (tRAS): 6

 

mem voltage: 2.75

agp voltage: default 1.5 (may need to be 1.6)

all other settings to defaults

 

try that.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...