Jump to content
Corsair Community

Dual Channel not working


SniclePants

Recommended Posts

I just built a new pc AMD 4000+ 2.4ghz, LAN PARTY nF4 SLI-DR, and my ram is (3-3-3-8)TWINX2048-3200PRO (XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory) and when i put the ram in slots 2 and 4 for dual channel my computer crashes and restarts. But when i use 1 stick of ram in slot 2 it works fine. I downloaded memtest and ran that on each stick individualy in slot 2. They both got 0 errors after 3 tests. I then ran a test with 1 module in slot 2 and the other in slot 4 and got 10 errors. Can anyone help me? do i have to configure something?
Link to comment
Share on other sites

Should be something like:

 

Genie BIOS Setting -> DRAM 2.5V Voltage (This field will show the DRAM's current voltage)

Genie BIOS Setting -> DRAM Voltage Control (This field allows you to manually select higher voltage supplied to the DRAM)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...