Corsair 1000D new build

[kampers]

Hello i will build new pc with Corsair 1000D. Need help complete the parts what needed for best performance ?

With radiator 4x 480/ 45 ?

Fan -  Push/Pul ? Don't need RGB 😆 

Gpu block HEATKILLER V PRO FOR RTX 4090 ASUS STRIX/TUF ?

Cpu block ?

Pumps ? HEATKILLER ?

Controler - aquaero 

 

Wait for new z790 and 14900k

GPU Strix 4090 OC

PSU HX1500i 2023.

Soft tubing.

[LeDoyen]

best performance, no RGB fans, heatkiller blocks, Aquacomputer controller.. What are you doing in the Corsair forums lol

Push pull, honestly, really not needed with so many fans. you could put the very worst, bad static pressure, low RPM fans you can find, you'll still have overkill cooling. Since we're here, maybe Corsair AF Elite, or ML elite would do the trick. If you want to go over the top, maybe have a look at the Phanteks T30. They are 30mm thick fans, maglev, up to 3000 RPM with ridiculous static pressure even at moderate speeds.. the price is also ridiculous though.

Aquaero.. do you really need the few special features it has? are you going to use other OSes than windows and need to use hardware virtual sensors ? If the Aquasuite service will always be running, you can use an Octo for cheaper and have more PWM outputs to drive all these fans.

For the CPU block, the last little round-up by Derbauer ranked the heatkiller IV pro block pretty good, with the Alphacool core 1 and aquacomputer cuplex kryos. Mind you that was on a lapped CPU with flat cold plate blocks. If you plan on keeping using the CPU without lapping it, a convex cold plate can yield better results. But the major brands were within 2°C of each other so... doesn't matter too much.

What you really need tho is a contact frame with anything LGA1700. The temperature gains can be pretty significant. On my 13900k (also on custom loop) i gained no less than 15°C under full load (253W) by installing one. it costs 10 - 15$, so.. get it, mandatory 😛 and you don't want a bent CPU anyway.

Pump, as long as it's a good DDC or D5, it's up to aesthetics really. See what makes he most sense in terms of tube routing maybe.

[kampers]

11 hours ago, LeDoyen said:

best performance, no RGB fans, heatkiller blocks, Aquacomputer controller.. What are you doing in the Corsair forums lol

Need info with radiator can mount 4x480x45 or another info about pumps fans ? maybe someone have build and kan give some tips ?

[LeDoyen]

i was teasing 😛

there is a huge topic for 1000D  builds that may help 

 

For rads, i wonder if the maximum isn't 360mm up top.. but check it out.

[kampers]

I get som parts 🙂

Have question about connecting GPU to PSU. It's doesn't matter where i connected adapter do GPU or it's line vertical or horizontal ? 

 

 

Edited September 26, 2023 by kampers

[LeDoyen]

doesn't matter. wherever it's the cleanest for cable routing. All the 8 pin sockets on the PSU are the same.

[kampers]

Hello i have connected one of cable USB 3.1 Connection from front panel. But only work to right close to usb C. Can work 4 of them ?

I have Asus x670e Hero.

[LeDoyen]

apparently you should have a second USB3 header

[kampers]

Edited November 12, 2023 by kampers

[kampers]

Finally looks like that 🙂