Jump to content
Corsair Community

Corsair LL120 fan only lights up in center?


Recommended Posts

I turned off my PSU because I was repositioning my PC and when I turned it back on afterwards my 4th LL fan was only lit in the middle.
After I left my PC overnight, all the LEDs suddenly lit up again.
But when I switched off the power supply again in the afternoon, I had the same problem again.


*Pictures attached


Has anyone had a similar problem or a suggested solution?

IMG_3561.jpeg

IMG_3560.jpeg

Link to comment
Share on other sites

Just the back fan #4?  The Lighting Node Pro and its RGB hub are serial.  Fortunately this one is at the end of the chain, but a way to prove the point is to swap in on the RGB hub with #1.  If that is a back section of LEDs, it usually will cause the other fans 2-4 not to light up.  

 

If true, you'll need a new LL120.  Warranty period is 2 years and you can file a RMA request from Support Link at the bottom of this page or on the main site.  

Link to comment
Share on other sites

On 5/7/2023 at 10:45 PM, c-attack said:

Just the back fan #4?  The Lighting Node Pro and its RGB hub are serial.  Fortunately this one is at the end of the chain, but a way to prove the point is to swap in on the RGB hub with #1.  If that is a back section of LEDs, it usually will cause the other fans 2-4 not to light up.  

 

If true, you'll need a new LL120.  Warranty period is 2 years and you can file a RMA request from Support Link at the bottom of this page or on the main site.  

Thanks for your reply.

Fortunately it works again, but after a few hours of use the outer ring led is stuck at the same colors, but idk why.

I think the led connection of the outer rings could have an issue.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...