Corsair Employees Corsair Nick Posted January 31 Corsair Employees Share Posted January 31 Software Enhancements • Tutorials will now have an animation to indicate a misclick outside of the intended area • Murals now supports different layout configurations for your devices – users can find this new feature above the device placement area in Murals • Holiday themed videos have been added to the Murals video library • Users with Intel ARK GPUs will no longer experience iCUE application errors • iCUE macOS will no longer crash when using Facetime with any CORSAIR headset • Watercolor Spectrum icon is now consistent in both Lighting Effects and Hardware Lighting tabs • Resolved the Type Lighting issue with Lighting Link when used with LS100 and LT100 devices View full version 1 Link to comment Share on other sites More sharing options...
t1971 Posted January 31 Share Posted January 31 Half my devices just disappeared after updating! Link to comment Share on other sites More sharing options...
t1971 Posted January 31 Share Posted January 31 Clean install got them back. Link to comment Share on other sites More sharing options...
Funkybadger iv Posted January 31 Share Posted January 31 8 hours ago, Corsair Nick said: Software Enhancements • Tutorials will now have an animation to indicate a misclick outside of the intended area • Murals now supports different layout configurations for your devices – users can find this new feature above the device placement area in Murals • Holiday themed videos have been added to the Murals video library • Users with Intel ARK GPUs will no longer experience iCUE application errors • iCUE macOS will no longer crash when using Facetime with any CORSAIR headset • Watercolor Spectrum icon is now consistent in both Lighting Effects and Hardware Lighting tabs • Resolved the Type Lighting issue with Lighting Link when used with LS100 and LT100 devices View full version Hi it would be really nice if we could get a speed control for all mural video captures default and ones we add to it 1 Link to comment Share on other sites More sharing options...
Classic Posted January 31 Share Posted January 31 Is the K100 getting stuck Bug fixed whithin this? Its a pretty expensive Keyboard and its annyoing. I hace to manually pull it out and reconnect everytime, pretty cool while playing. Link to comment Share on other sites More sharing options...
Oxnull Posted January 31 Share Posted January 31 my RTX 3090 has a new load sensor in the dashboard section, didn't see it in the patch notes, but pretty cool 1 Link to comment Share on other sites More sharing options...
KMBakPL Posted January 31 Share Posted January 31 (edited) 9 hours ago, Oxnull said: my RTX 3090 has a new load sensor in the dashboard section, didn't see it in the patch notes, but pretty cool Yeah, I found it too on my 3080Ti. It shows also in icue nexus but it works faulty. It shows 14-15% GPU suage when there is almost 99-100%. CPU load is ok (+/- 1%). Edited January 31 by KMBakPL Link to comment Share on other sites More sharing options...
SavR Posted February 1 Share Posted February 1 BUG: On HS70 Wireless Pro, ICue v 4.33.138 enables AutoShutdown even when using the Headset. Have to press a physical button to cancel the AutoShutdown. With previous 4.32.129 didn't had this issue. Link to comment Share on other sites More sharing options...
BlaiseP Posted February 1 Share Posted February 1 Issue with ICUE/StreamDeck... cannot communicate with ICUE using plugin v1.2.105. No issues with the previous version of ICUE (v4.29.203). Have tried uninstalling/reinstalling the ICUE plugin which doesn't fix the issue (current version in the Elgato "Store" is what I have installed, v1.2.105). I have two machines that are experiencing the exact same issue. This has happened in the distant past and required a new file by Corsair to remedy. 3 Link to comment Share on other sites More sharing options...
Cyco_tK Posted February 1 Share Posted February 1 (edited) STILL not fixed this issue with the iCue Nexus: It has been broken now for 8 MONTHS and there has been NO response from Corsair about this! Edited February 1 by Cyco_tK spelling mistake 1 Link to comment Share on other sites More sharing options...
Ozzy_90 Posted February 1 Share Posted February 1 (edited) I bought the keyboard but I was very disappointed. I bought the K100 opx model. You cannot run 2 macros at the same time. Only 1 macro works. Also, if you run a macro, the keyboard sometimes becomes completely useless. To regain access, you have to unplug the usb cable and plug it back in. All these issues make for a lousy gaming experience. +A new problem update error is coming. Edited February 1 by Ozzy_90 Link to comment Share on other sites More sharing options...
GermanBernd Posted February 1 Share Posted February 1 Corsair hat die neuste Firmware 1.11.39 zurückgezogen, weil sie einen riesen Bug hat. Und sie schaffen es nicht diesen Bug zu beheben. Und das für eine Tastatur die über 200 Euro kostet. Link to comment Share on other sites More sharing options...
logue1993 Posted February 1 Share Posted February 1 (edited) 10 hours ago, BlaiseP said: Issue with ICUE/StreamDeck... cannot communicate with ICUE using plugin v1.2.105. No issues with the previous version of ICUE (v4.29.203). Have tried uninstalling/reinstalling the ICUE plugin which doesn't fix the issue (current version in the Elgato "Store" is what I have installed, v1.2.105). I have two machines that are experiencing the exact same issue. This has happened in the distant past and required a new file by Corsair to remedy. this... happened here too. The Stream Deck iCUE plugin doesn't work anymore, saying it needs to be updated. Also, I remember having this problem in the past as well, solution was as mentioned: Corsair provided an updated version of the plugin and it worked. Edited February 1 by logue1993 1 Link to comment Share on other sites More sharing options...
west1986 Posted February 1 Share Posted February 1 there's no more "rain" lighting????? Link to comment Share on other sites More sharing options...
Arialia Posted February 1 Share Posted February 1 Nice but Dashboard always lost at each boot and what interest of Murals ? don't understand Link to comment Share on other sites More sharing options...
TheCloop123 Posted February 1 Share Posted February 1 (edited) When are you going to fix this issue This outright breaks ALL cooling profiles because it defults every profile to a low fan curve, it would be nice if fan curves DIDNT rely on ICUE here but when I cannot pinpoint when dashboard/ICUE no longer correctly monitor ANY sensor its almost impossible to tell when my curves are working or not working. This is on the latest version of ICUE Doesnt matter how many times I restar ICUE services, restart PC etc. sensors will "update" then within a few minutes flatline even though I can see the values change in other monitoring software, the only thing that seems to be unaffected is my Commander CORE XT fan curves which seem to correctly "change" but as its based of temp sensors that flatline they dont even "increase or decrease" accordingly to the curve set and temperature met. Edited February 1 by TheCloop123 Link to comment Share on other sites More sharing options...
XIIBerry Posted February 2 Share Posted February 2 4 hours ago, TheCloop123 said: When are you going to fix this issue This outright breaks ALL cooling profiles because it defults every profile to a low fan curve, it would be nice if fan curves DIDNT rely on ICUE here but when I cannot pinpoint when dashboard/ICUE no longer correctly monitor ANY sensor its almost impossible to tell when my curves are working or not working. This is on the latest version of ICUE Doesnt matter how many times I restar ICUE services, restart PC etc. sensors will "update" then within a few minutes flatline even though I can see the values change in other monitoring software, the only thing that seems to be unaffected is my Commander CORE XT fan curves which seem to correctly "change" but as its based of temp sensors that flatline they dont even "increase or decrease" accordingly to the curve set and temperature met. Just updated to 4.33.138 as it came up just now for updating, and behold, my fan profiles are still as they were, for the first time. Can`t say if it solved the troubles with K100, as i`m back to my K70. Stream deck isn`t showing up as a plug-inn. It shows up now in the "active clients list" under software and games. Link to comment Share on other sites More sharing options...
Alex589 Posted February 2 Share Posted February 2 cant open the icue application on windows 11. tried updating windows, uninstalling and installing icue with reboots and still not success. Any suggestions? Link to comment Share on other sites More sharing options...
guenni1972 Posted February 2 Share Posted February 2 Hi! I had big issues with iCUE 4.3X so for. I got randomly BSODs related to a cpuZ_v154.sys that (maybe internaly?) used by iCUE? Anyone here who had similar issues in the past and can confirm that iCUE now runs more stable? Thank you for your Feedback! Link to comment Share on other sites More sharing options...
Gracey Posted February 2 Share Posted February 2 On 2/1/2023 at 10:45 PM, Ozzy_90 said: the keyboard sometimes becomes completely useless. To regain access, you have to unplug the usb cable and plug it back in. All these issues make for a lousy gaming experience. There is a whole separate thread for this issue, though at this stage there is no permanent fix. Just a couple of things to test. Regarding the failed update in iCue, this is due to Corsair disabling the K100 update service to prevent more people getting onto this problematic firmware. Link to comment Share on other sites More sharing options...
Citizen Crazed Posted February 3 Share Posted February 3 On 2/1/2023 at 4:52 AM, BlaiseP said: Issue with ICUE/StreamDeck... cannot communicate with ICUE using plugin v1.2.105. No issues with the previous version of ICUE (v4.29.203). Have tried uninstalling/reinstalling the ICUE plugin which doesn't fix the issue (current version in the Elgato "Store" is what I have installed, v1.2.105). I have two machines that are experiencing the exact same issue. This has happened in the distant past and required a new file by Corsair to remedy. Plus one to this. Hitting any iCUE-related StreamDeck button throws the big yellow triangle with the exclamation, and the StreamDeck UI says "Update required. Please ensure you are running the latest version of iCUE and the iCUE plugin". Plugin installed was 1.2.105, uninstalling and reinstalling makes no difference. Will see if regressing back to 4.32 is an interim solution. On a related note, the StreamDeck iCue plugin is a bit outdated anyway given lack of murals support etc - so an update is well due. 🙂 2 Link to comment Share on other sites More sharing options...
Citizen Crazed Posted February 3 Share Posted February 3 Yep, further to above, reverting to iCUE 4.32.129 is painless and immediately restores StreamDeck integration. Link to comment Share on other sites More sharing options...
cofsert Posted February 3 Share Posted February 3 (edited) This "Time to set up Lightning" POP UP and I can't click anything in ICUE Pls fix it. Edited February 3 by cofsert Link to comment Share on other sites More sharing options...
SpabalinasDesign Posted February 3 Share Posted February 3 Noticed this version of iCUE, the Commander Core XT disappears from iCUE and loses function, but windows report it running without issue. Even after rebooting iCUE program, the Commander Core XT does not return. A cold boot, shows the Commander Core XT again but soon after disappear. I did a clean install, and Commander Core XT continues to disappear. Also, tutorial pop ups in new installations do not close forcing you to alt-f4 because you cannot close the pop up at all. Link to comment Share on other sites More sharing options...
SpabalinasDesign Posted February 3 Share Posted February 3 6 hours ago, SpabalinasDesign said: Noticed this version of iCUE, the Commander Core XT disappears from iCUE and loses function, but windows report it running without issue. Even after rebooting iCUE program, the Commander Core XT does not return. A cold boot, shows the Commander Core XT again but soon after disappear. I did a clean install, and Commander Core XT continues to disappear. Also, tutorial pop ups in new installations do not close forcing you to alt-f4 because you cannot close the pop up at all. I was able to by pass time to setup lighting tutorial by using an older version of iCUE and then updating iCUE. My issue with Commander Core XT seems to just show up and than disappeared. I'm starting to think it might be malfunction. I ordered a new Commander Core XT to see if the issue persists. Link to comment Share on other sites More sharing options...
Recommended Posts