Jump to content
Corsair Community

Corsair DDR XMS3200 had an Failure?

Recommended Posts

Hello,i had an problem with my corsair memory.I had Two corsair memory 1. Corsair 2700 2. corsair 3200 when i boot my PC with two memory´s i can start XP and the PC crash with a Blue screen. when i start the pc with memory 1. its all ok.when i start the pc with memory 2. then i cant boot the PC the mainboard make only blip blip ....

i think the memory 2. had an failure.

what can i do ???

i buy the memory 16.09.2002

i think i need the supprt adress from germany.than i can send my defect memory.-

sorry my english is not so good.

Link to comment
Share on other sites

  • Corsair Employees

You can not run 2 different modules in Dual channel mode.


Please test the modules one at a time with http://www.memtest.org and I would set the Dim Voltage to 2.7 Volts as well. If you do find one failing then lets get it or them replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

However; if you get errors with both modules, that would suggest some other problem, and I would try testing the memory in another system to be sure.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...