Corsair LN Pro question

[replicator]

Hi 

Couple of questions for you guys.

I have just finished hard tubing my sons build and have a couple of issues.

I had the 2 rgb hubs on the the com pro chn 1 and 2 ,they all lit up in their standard pattern as still in leak testing phase.

I then daisy chained the corsair res female to the corsair gpu block male then the gpu female to the corsair cpu block then the res male into the LNP pro .,but only the res lit up .

So i tried another way by connecting rgb hub 1 onto LNP pro chnl 1 and the 2nd rgb hub to chnl 2 but only the first fan lit up on both rgb hubs.

Is this because i have to go into icue and select LNP pro and select how many fans each chnl hub has .

Also is this the same for the hydrox res/gpu/cpu blocks.not all lightkng up together(only res ,but all work sepedatly) when plugged in  while daisy chained in either compro led ports of the LNP pro 

I thought they would all light up like the rgb hubs to compro led ports 1 and 2.

 

 

[c-attack]

12 hours ago, replicator said:

I had the 2 rgb hubs on the the com pro chn 1 and 2 ,they all lit up in their standard pattern as still in leak testing phase.

I then daisy chained the corsair res female to the corsair gpu block male then the gpu female to the corsair cpu block then the res male into the LNP pro .,but only the res lit up .

The pump/res -> GPU-> CPU block chain is intended to connect directly to the LED channel.  In CUE you add them as "Hydro X" then + each component you have.  Each one shows as a separate device with individually controllable LEDs.  They may not light up until CUE is assigned the right combination.  Once you start moving things around between controllers pre-set up, you are not likely going to get the results you want.  The Commander Pro and Lighting Node Pro do not have auto-detect features for RGB.