Tuifl Posted December 9, 2022 Share Posted December 9, 2022 Dear community, Since 3 days I get a "pump error" after the start - the system seems to be running at full load. The pump is not even a week old. The system boots up - 10 seconds normal fan noise and illumination shortly afterwards all is turning red and the Fans run 100% load as a brief information: in iCue, the fans run at about 2000 revolutions. The CPU temperature seems "normal" at about 47-50° under load - so the pump itself seems to be working and also the fans. However, it is unbearable that the fans run at full load all the time. I have already reconnected everything to rule out an error here and also swapped the USB port on the mainboard. When the PC starts, the fan runs normally for about 10 seconds and also displays an image. Immediately afterwards, the fans spin up. The motherboard is an MSI MPGZ 490 - Gaming Plus Link to comment Share on other sites More sharing options...
Tuifl Posted December 9, 2022 Author Share Posted December 9, 2022 WOuld a firmware upgrade/ reset (manually without icue)) help to sort this maybe? If so: where can I download the right firmware and flash it? Anyone any idea/ instruction? Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Jagtech Posted December 10, 2022 Corsair Employees Share Posted December 10, 2022 I have just replied to your ticket. Please do reach out at your convenience. So sorry for the experience. Link to comment Share on other sites More sharing options...
Tuifl Posted December 26, 2022 Author Share Posted December 26, 2022 Hi all, issue could not be solved as it seems a hardware failure. Replacing the unit fixed the issue.. Link to comment Share on other sites More sharing options...
muvo Posted December 26, 2022 Share Posted December 26, 2022 @Tuifl wir haben auch ein deutsches forum 😄 deutscher-support Link to comment Share on other sites More sharing options...
Mariochavo Posted January 17 Share Posted January 17 I’ve been having the same issue. Only had the unit for a few months and icue software is telling me pump failure. My cpu isn’t overheating. Pump shows in my bios that it’s working, however, when system turn on, it begins to blink red and showing pump failure… I’ve checked Reddit and it looks to be a common issue with the h150i Elite Capellix. This is my third Corsair Aaio. My last Corsair lasted 9 years, this one only lasted a few months. I’ll be posting videos on Reddit. Link to comment Share on other sites More sharing options...
Zero Fame Posted January 26 Share Posted January 26 Same issue here just today Jan 25th. Was just all good yesterday. Plugged in today and **** is blinking red and pump failure msg. Link to comment Share on other sites More sharing options...
Arden501 Posted May 7 Share Posted May 7 CPU cooler worked great until a few days ago, all of a sudden I can’t play for more than an hour without this issue arising. Link to comment Share on other sites More sharing options...
IcyArts Posted September 12 Share Posted September 12 I got this error a few days ago. Made sure all the connections were tight and they seemed fine. Pc keeps overheating even tho I can feel vibrations in the lines. It ran perfect at first and poof, got this light and it all went downhill. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now