Jump to content
Corsair Community

K100 Air not using synced mural ligtning

Recommended Posts


I'm currently running a corsair heavy iCUE RGB build with a Mural and a lightning profile for Cyberpunk, that i've downloaded from the official Corsair page.

My K100 Air, that i received today does not synchronize it's lightning with my other devices. However it is regocnized on icue and works well together with my mouse and headset on a single Slipstream connector.

Anyone with the same issue?




Link to comment
Share on other sites

Hey, hey!

Due to hardware limitations, wireless devices are currently not supported with Murals. If you keep it plugged in, it should work as expected.

Edited by PJH
Link to comment
Share on other sites

Murals/Scenes are not profiles and do not save to the device. Don’t confuse Murals (a superficial lighting layer on top of a profile) with the actual CUE profiles that contain lighting, key assignments, and various other settings that are the working part of the software. 

It’s unlikely the Cyberpunk lighting profile has been updated for the K100 Air. Each time a new device is released, each existing lighting profile must be programmed for it. Sometimes with KBs you are more fortunate and most of the key lighting is there. The wireless nature of the K100 might alter that. 

Im not terribly surprised the K100 air is currently not working with murals. It may not have been included in the development process prior to its release. A wireless kb would need to transmit a lot more lighting data than a wireless mouse or pair of headphones and often those types or peripherals have more limited lighting choices in wireless mode. I don’t know for sure if that is the current limitation, but as suggested above try connecting via cable and see if Murals/Scenes now is functional. That would prove the point one way or the other. 

Edited by c-attack
Link to comment
Share on other sites

4 hours ago, visawee said:

Is that so? My Virtouso XT SE and my Dark Core RGB SE don't seem to bother.

I also get notifications in iCUE stating that the profile has been saved successfully on the K100. 

Hey, hey!

Sorry, I should have been more specific here. K100 AIR has the hardware limitation in wireless mode.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Create New...