Help with commander XT/Lightning Node

[Kywildcats09]

I have read through many of the posts and I just want to be 100% sure if someone could lend their expertise.

 

I am purchasing 6 ql fans, and 3 LL120 fans (to go on my AIO). I will NOT have a commander core as I didn't get the cappelix version of AIO.

I will have 3 lightning nodes that come with fans - do I just need to get a commander pro XT to control all fans speed and RGB in ICUE?

 

Thank you for your help!

[c-attack]

Speed Control - 6 PWM on Commander XT. 3 PWM on AIO internal controller. 
 

RGB - 6 on the Commander XT.  Then you will need one Lighting Node Core (from QL multipacks)  or RGB lighting hub (from LL pack) for the last three. Both methods work for either fan type. In theory, the RGB lighting hub can connect to the led port on the Com XT so you don’t need a second usb connection, but we have not seen a lot of users in this configuration. 

[Kywildcats09]

15 minutes ago, c-attack said:

Speed Control - 6 PWM on Commander XT. 3 PWM on AIO internal controller. 
 

RGB - 6 on the Commander XT.  Then you will need one Lighting Node Core (from QL multipacks)  or RGB lighting hub (from LL pack) for the last three. Both methods work for either fan type. In theory, the RGB lighting hub can connect to the led port on the Com XT so you don’t need a second usb connection, but we have not seen a lot of users in this configuration. 

You are a gentleman and a scholar