Jump to content
Corsair Community

2*512mb CL2.5 + 1*1gb C3 ok?


Recommended Posts



i'm a total ram noob! I have a "MSI K8N Neo nForce3 250Gb 3DDR-DIMM Socket754" with 2 of the three slots occupied by 2 "Corsair VS512MB400 Value Select 512Mb DDR PC3200 400MHz 184pin CL2.5"


I really want some more ram and wonder if I should go for a third 512 stick of the above ram or if it's ok to get a "Corsair VS1GB400C3 Value Select 1024Mb DDR PC3200 400MHz CAS3 Unbuffered" and place that in the third slot to get 2gb ram instead of 1.5gb...


Thanks in advance...


Edit: I know I have to accept 333mhz instead of 400mhz If I fill upp all three slots...



Link to comment
Share on other sites

  • Corsair Employees
No! If you mix memory with this MB it may not post. If you need more memory I would encourage you to find another use for these modules you have now and just get a VS2GBKit400C3 set of modules for best performance.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...