redzo6 Posted June 11, 2005 Share Posted June 11, 2005 I have had my 2.8 for about 2 years with a asus p4p800 motherboard and purchased the twinx 512 llpt memory for the system. I keep the bios updated as well as my drivers. I dont change much in my bios except the voltage which is just one above normal setting. Anyway my memory just recently started rebooting after playing any game. I have not changed anything. I download a window memory tester from microsoft and it said I failed the INVC and the LRAND. Any help would be appreciated Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 13, 2005 Corsair Employee Share Posted June 13, 2005 Please make sure that you have the latest BIOS for your MB and load Setup/optimized default settings, and try the following BIOS settings; TwinX1024 or TwinX512-3200LL Advanced/Jumper Free AI over clocking: Manual CPU Freq: 200 DRAM Clock: 400 MHz Memory or Dim Reference voltage: 2.75 or 2.85 Volts System performance: AUTO AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!* Advanced/Chipset Configure Dram timing by SPD: Disabled/User define SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 6T SDRAM Burst Length: 8 Memory Acceleration Mode: Auto USB Legacy Support: Disabled All other settings should be set to default settings! Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.