fasa Posted June 11, 2005 Share Posted June 11, 2005 Bad stick CMX512-3200LL TWINX I have two of these and one seems to have gone bad . I down loaded the mem tester program and ran it with one stick in slot 1 all night and got no errors , but the next night I did the test with the second stick in the same slot and received errors right away . julius Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 13, 2005 Corsair Employee Share Posted June 13, 2005 Please make sure that you had Legacy USB disabled and test the modules one at a time with http://www.memtest.org and I would set the Dim Voltage to 2.75 Volts as well. If you do find one failing then lets get it or them replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However; if you get errors with both modules, that would suggest some other problem. And I would try testing the memory in another system to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.