(Another I guess) 7000D and radiator layout question.

[Steiner-KD]

Getting closer, should get gfx card and water block for it next week. Trying to figure out the Leakshield tech.

 

[Steiner-KD]

And Graphics card is here and waterblocked (Sapphire Radeon RX7900 XTX Nitro+, Alphacool block)

[nothingbetter20]

your build is looking very good. looks like you were able to keep the 45mm thick radiator. I just got a 7000D. I wanted to use the EKWB active back plate Dimensions: 307 x 155 x 41mm and P420M 465 x 145 x 44mm and P360M 405 x 130 x 44mm radiators. do you have fans on the front. if you do what thickness? 

[Steiner-KD]

On 8/6/2023 at 6:23 AM, nothingbetter20 said:

your build is looking very good. looks like you were able to keep the 45mm thick radiator. I just got a 7000D. I wanted to use the EKWB active back plate Dimensions: 307 x 155 x 41mm and P420M 465 x 145 x 44mm and P360M 405 x 130 x 44mm radiators. do you have fans on the front. if you do what thickness? 

Thank you, I'm quite happy with it.
I have 45mm thick front and top, 25mm rear wall. The way I mount the gfx card I have about ~320mm+ from the rear of the case to the nearest fitting.(in -ort of res). If you make your own bushings between the rad bracket and pump holder you could probably buy another 5mm. If you have a 45mm in the front you will NOT be able to have a 45mm rad against the side wall, the fit between the side wall and front rad is VERY tight. with a 25mm rad+25mm fans. If you only run 2 rads (front and top) you can have fans against the side wall no issues. Yes, the fans are standard 25mm ones and go on the outside of the rad holder, no issues there, plenty space. As you can see there's plenty space for quite thick fans in the front. If you have any further questions please let me know and I will try to help.

[Steiner-KD]

[Steiner-KD]