Jump to content
Corsair Community

Bad module - VS512MB400


Recommended Posts

I have two VS512MB400 modules in my computer. They worked fine for 3 months, but then I started having issues. I removed one module, booted with just the one module, and it worked fine. I swapped that module with the other and attempted to boot, but no luck. Replacing both modules in either slot configuration (I only have two slots) made the computer not boot. I removed the bad chip, attempted to boot again, and it worked fine. This leads me to believe the chip is bad.

 

I then tried both modules in other machines with the same result. All signs point to the one module needing to be replaced.

 

The BIOS on all machines I tested the chips on were updated fully. I reset the BIOS to fail-safe parameters.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...