LS100 + expansions and iCue

[Parksie]

I’d like to know if the ls100 controller will run six 450mm strips and work in sequence using lighting link? Can I put all six in a single port or, if I have to put three in port 1 and three in port 2, will they work in sequence eg 1-2-3-4-5-6 or at the same time eg 11-22-33? (I hope my explanation comes through how it’s meant to 🙈)

[c-attack]

I believe you are limited to 5 x 450mm strips.  CUE is programmed to allow varying combinations based on length, but I can't get it past 5 x 450mm.  So based on that, your idea of using 3x450 on Ch1 and 3x450 on Ch2 should work for lighting link effects as channels 1 and 2 fire sequentially.  Visor, color wave, and Type Lighting Link.  

 

For normal effects, it will run as 1-3 and a separate instance for 4-6 in each channel, typical of standard separate lighting groups.  

Edited July 18 by c-attack

[Parksie]

3 hours ago, c-attack said:

I believe you are limited to 5 x 450mm strips.  CUE is programmed to allow varying combinations based on length, but I can't get it past 5 x 450mm.  So based on that, your idea of using 3x450 on Ch1 and 3x450 on Ch2 should work for lighting link effects as channels 1 and 2 fire sequentially.  Visor, color wave, and Type Lighting Link.  

 

For normal effects, it will run as 1-3 and a separate instance for 4-6 in each channel, typical of standard separate lighting groups.  

Thanks for the reply. Looks like I’ll be spending some more on the Corsair money pit 🤣