Jump to content
Corsair Community

cmx512-3200c2pt failed test 5


Recommended Posts

  • Corsair Employees

Errors in test 5 might suggest some other problem.

Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set?

Link to comment
Share on other sites

Errors in test 5 might suggest some other problem.

Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set?

 

I forgot to mention that I have 2x CMX512-3200C2PT

 

DFI Lanparty SLI-DR

AMD64 3500+

CPU/FSB are on auto

The only thing I changed was

Command Per Clock from enabled to disabled

and USB Memory type from Shadow to 640k

Link to comment
Share on other sites

  • Corsair Employees

Please make sure you have the latest BIOS installed for your MB (download the Beta version) and load optimized defaults settings, and try the following BIOS settings;

TwinX512 or Twinx1024-3200C2

Genie BIOS/DRAM Configuration

DRAM Frequency Set: 1:1 or 400MHz or 200 (if option are 133/166/200)

Command per Clock: Enabled

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

And leave the rest at AUTO setting

Genie BIOS

FSB BUS Frequency: 200

LDT/FSB Frequency ratio: 5X

LDT Bus Transfer Width: 16 16

CPU/FSB Frequency ratio: Auto

PCI Ex: 100

K8 cool N’ quiet: Disable

CPU VID Start Up Value: 1.55

CPU VID Control: 1.55

CPU VID Special Control: Auto

Chipset Voltage Control: 1.6

DRAM Voltage Control: 2.8

All other settings are motherboards defaults

Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...