I bought new Corsair ram xmp not working help

[hasar07]

Corsair Vengeance RGB Pro 32gb 3200mhz

I bought the product from amazon, if the problem is not solved, I will return it
BIOS UPDATE
Motherboard: Gigabyte B450m s2h
CPU: Ryzen 5 2600
My Old Memory is running Gskill Ripjaws 16gb 3200mhz xmp
HELPPP

[BlaiseP]

Try manually setting the RAM voltage to 1.35V. I've had to manually configure RAM voltages of thing in the past on the odd motherboard or two.

[Corsair Raven]

14 hours ago, hasar07 said:

Corsair Vengeance RGB Pro 32gb 3200mhz

I bought the product from amazon, if the problem is not solved, I will return it
BIOS UPDATE
Motherboard: Gigabyte B450m s2h
CPU: Ryzen 5 2600
My Old Memory is running Gskill Ripjaws 16gb 3200mhz xmp
HELPPP

Hey there! When you installed the new memory kit from us, did you clear the CMOS prior to installing the new kit? Try clearing the CMOS then enabling the overclocking profile in the bios. Do you also have the SKU for the kit that you installed? I am curious to see if the kit is compatible with your motherboards chipset.

[hasar07]

7 hours ago, Corsair Raven said:

Merhaba! Yeni bellek kitini bizden taktığınızda, yeni kiti takmadan önce CMOS'u temizlediniz mi? CMOS'u temizlemeyi ve ardından bios'ta hız aşırtma profilini etkinleştirmeyi deneyin. Yüklediğiniz kitin SKU'su da var mı? Kitin anakart yonga setinizle uyumlu olup olmadığını merak ediyorum.

I don't know exactly what sku is, but I think it has to do with barcode.
I think there is SKU
bios updated and bios reset
Motherboard: Gigabyte b450m s2h
Processor: AMD Ryzen 5 2600

[hasar07]

20 hours ago, BlaiseP said:

Try manually setting the RAM voltage to 1.35V. I've had to manually configure RAM voltages of thing in the past on the odd motherboard or two.

I manually set the RAM voltage to 1.35V, unfortunately it didn't work.

[Corsair Raven]

Hey again. Near the barcode there should be a part number. For DDR4 Vengeance RGB Pro Kits it should be something like.. CMW32GX4M..

If you can provide that part number for your kit, we can check the chipset compatibility.

[hasar07]

1 hour ago, Corsair Raven said:

Tekrar merhaba. Barkodun yanında bir parça numarası bulunmalıdır. DDR4 Vengeance RGB Pro Kitleri için şöyle bir şey olmalı.. CMW32GX4M..

Kitiniz için bu parça numarasını sağlayabilirseniz, yonga seti uyumluluğunu kontrol edebiliriz.

CMW32GX4M2E3200C16

[hasar07]

1 hour ago, Corsair Raven said:

Hey again. Near the barcode there should be a part number. For DDR4 Vengeance RGB Pro Kits it should be something like.. CMW32GX4M..

If you can provide that part number for your kit, we can check the chipset compatibility.

How can we check chipset compatibility? I would like to learn

[Corsair Raven]

When you search that part number/sku in a search engine -- you can get a result for the product page on our webstore. Match the SKU to the Part number on your kit:

Then when you scroll down, select the Tech Specs and look for the compatibility section:

So this kit should be fine with your B450 board. I would clear the CMOS then reseat the 2 modules, then enable the overclocking profile in BIOS. It may be listed as Extreme Memory Profile. Select a profile, apply and save the BIOS settings. Once you are in Windows, check your Task manager, Performance Tab, Memory, and see what speed it's running at.

I hope that helps!

[hasar07]

1 hour ago, Corsair Raven said:

Bu parça numarasını / sku'yu bir arama motorunda aradığınızda, web mağazamızdaki ürün sayfası için bir sonuç alabilirsiniz. SKU'yu kitinizdeki Parça numarasıyla eşleştirin:

Ardından, aşağı kaydırdığınızda, Teknik Özellikler'i seçin ve uyumluluk bölümünü arayın:

Bu yüzden bu kit B450 kartınızla iyi olmalıdır. CMOS'u temizleyip 2 modülü yeniden yerleştirir, ardından BIOS'ta hız aşırtma profilini etkinleştirirdim. Extreme Memory Profile (Aşırı Bellek Profili) olarak listelenebilir. Bir profil seçin, BIOS ayarlarını uygulayın ve kaydedin. Windows'a girdikten sonra, Görev yöneticinizi, Performans Sekmesini, Belleğinizi kontrol edin ve hangi hızda çalıştığını görün.

Umarım yardımcı olur!

I made the voltage 1.4 and it worked as 3200mhz

[Chiroptera]

For information, I also have a Gigabyte B450M S2H and it refused to boot with 2x16GB of Vengeance LPX rated for 3200MHz. CPUs tried were AMD Ryzen 3 3200G and Ryzen 5 5500. I had no problem with Crucial Ballistix, also rated for 3200MHz, when the XMP profile was selected.  After manual experimentation with a RAM voltage of 1.35V, I discovered that the problem was with the value of the cycle time value (Trc) which is set at 57 in the XMP profile within the SPD of the Vengeance part. When I overrode this value to 65, everything was file. All other SPD values worked. I noted that the equivalent value of Trc in the Ballistix part is set at 73 so this did not give a problem. 

I have also read the AMD Ryzen boards have a default value of 75 for Trc if left at Auto and this is the case for me unless it is overridden by the SPD value.