Asus P4C800 Deluxe / TWINX1024-3200XLPRO

[FCSP]

Hi!!!

I´m a new member and need your help.

I have a new computer and I´m working with it, I receive a error message on a blue screen and the computer restarts. The messages are not the same and I´m don´t kown what´s going on. I´m not sure about the compatibility of the motherboard and the Corsair memory. Could it be the problem? Pls help me.

My computer:

 

P4 3.20E Ghz/800Mhz/1MB L2 Cache

Asus P4C800 Deluxe

Ati Radeon 9800Pro/128 MB DDR

02 HDs Seagate Sata: 120GB & 160GB

Pinnacle Studio Deluxe_Version 9

 

Thanks.

[Wired]

They're compatible. Try these timings:

 

CAS Latency: 2

RAS to CAS Delay (tRCD): 2

Row Precharge (tRP): 2

Active to Precharge Delay (tRAS): 5

MEmory Voltage: 2.7x volts

[FCSP]

They're compatible. Try these timings:

 

CAS Latency: 2

RAS to CAS Delay (tRCD): 2

Row Precharge (tRP): 2

Active to Precharge Delay (tRAS): 5

MEmory Voltage: 2.7x volts

 

____

 

Thanks for your reply.

Could you please explain where and how I can make the adjustments you suggested? I´m not an expert.

 

Thank you again.

 

FCSP

[Yellowbeard]

Under the CHIPSET option in the bios highlight the SPD option and disable it. This will reveal the settings Wired listed. This is all detailed in the BIOS section in your manual.

 

Good luck, Mike.

[FCSP]

Under the CHIPSET option in the bios highlight the SPD option and disable it. This will reveal the settings Wired listed. This is all detailed in the BIOS section in your manual.

 

Good luck, Mike.

_______

 

Thank you Mike for your reply.

 

I will change settings in the BIOS.

 

Bye, Fernando Pinheiro